Here we have 3 little examples of hping2 uses:
Host uptime:
------------
hping2 host -p 80 -S --tcp-timestamp
Scanning :
---------
Syn scan:
hping2 -S target -p ++80 (++ will increase the port, for each try)
hping2 --scan known target
IDLE SCAN using Hping2
----------------------
The Players:
host A - evil host, the attacker.
host B - silent host.
host C - victim host.
A is your host.
B is a particular host: It must not send any packets while
you are scanning C. There are a lot of 'zero traffic' hosts
in internet, especially in the night :)
C is the victim, it must be vulnerable to SYN scan.
I've called this scan method 'dumb host scan' in honour of host
B characteristics.
How it works:
Host A monitors number of outgoing packets from B using id iphdr.
You can do this simply using hping:
#hping B -r
HPING B (eth0 xxx.yyy.zzz.jjj): no flags are set, 40 data bytes
60 bytes from xxx.yyy.zzz.jjj: flags=RA seq=0 ttl=64 id=41660 win=0 time=1.2 ms
60 bytes from xxx.yyy.zzz.jjj: flags=RA seq=1 ttl=64 id=+1 win=0 time=75 ms
60 bytes from xxx.yyy.zzz.jjj: flags=RA seq=2 ttl=64 id=+1 win=0 time=91 ms
60 bytes from xxx.yyy.zzz.jjj: flags=RA seq=3 ttl=64 id=+1 win=0 time=90 ms
60 bytes from xxx.yyy.zzz.jjj: flags=RA seq=4 ttl=64 id=+1 win=0 time=91 ms
60 bytes from xxx.yyy.zzz.jjj: flags=RA seq=5 ttl=64 id=+1 win=0 time=87 ms
-cut-
..
.
As you can see, id increases are always 1. So this host have the
characteristics that host B should to own.
Now host A sends SYN to port X of C spoofing from B.
(using hping => 0.67 is very easy, http://www.kyuzz.org/antirez)
if port X of C is open, host C will send SYN|ACK to B (yes,
host C don't know that the real sender is A). In this
case host B replies to SYN|ACK with a RST.
If we send to host C a few of SYN it will reply to B with a few
of SYN|ACK, so B will reply to C a few of RST... so
we'll see that host B is sending packets!
.
..
-cut-
60 bytes from xxx.yyy.zzz.jjj: flags=RA seq=17 ttl=64 id=+1 win=0 time=96 ms
60 bytes from xxx.yyy.zzz.jjj: flags=RA seq=18 ttl=64 id=+1 win=0 time=80 ms
60 bytes from xxx.yyy.zzz.jjj: flags=RA seq=19 ttl=64 id=+2 win=0 time=83 ms
60 bytes from xxx.yyy.zzz.jjj: flags=RA seq=20 ttl=64 id=+3 win=0 time=94 ms
60 bytes from xxx.yyy.zzz.jjj: flags=RA seq=21 ttl=64 id=+1 win=0 time=92 ms
60 bytes from xxx.yyy.zzz.jjj: flags=RA seq=22 ttl=64 id=+2 win=0 time=82 ms
-cut-
..
.
The port is open!
Instead, if port X of C is closed sending to C a few
of SYN spoofed from B, it will reply with RST to B, and
B will not reply (see 3). So we'll see that host B is not sending
any packet:
.
..
-cut-
60 bytes from xxx.yyy.zzz.jjj: flags=RA seq=52 ttl=64 id=+1 win=0 time=85 ms
60 bytes from xxx.yyy.zzz.jjj: flags=RA seq=53 ttl=64 id=+1 win=0 time=83 ms
60 bytes from xxx.yyy.zzz.jjj: flags=RA seq=54 ttl=64 id=+1 win=0 time=93 ms
60 bytes from xxx.yyy.zzz.jjj: flags=RA seq=55 ttl=64 id=+1 win=0 time=74 ms
60 bytes from xxx.yyy.zzz.jjj: flags=RA seq=56 ttl=64 id=+1 win=0 time=95 ms
60 bytes from xxx.yyy.zzz.jjj: flags=RA seq=57 ttl=64 id=+1 win=0 time=81 ms
-cut-
..
The port is closed.
All this can appear complicated to perform, but using two sessions
of hping on Linux virtual consoles or under X makes it more simple.
First session listen host B: hping B -r
Second session send spoofed SYN: hping C -a B -S
